Sealey EU908 Manuel d'utilisateur télécharger pdf (Page 46)

1) To view freeze frame data, use the UP/DOWN scroll button to

select Freeze Frame from Diagnostic Menu and press the OK

button. (Figure 6.3 )

2) Wait a few seconds while the scan tool validates the PID MAP.

3) If retrieved information covers more than one screen, use the

DOWN scroll button, as necessary, until all the data have been

shown up. (Figure 6.19)

Freeze Frame

DTC that caused required

freeze frame data storage

P0193

Fuel system 1 status OL

Fuel system 2 status --

Calculated load value 0.0 %

Engine coolant -40 C

temperature

Save

Figure 6.19

z If there is no available freeze frame data, an advisory message

“No freeze frame data stored!” shows on the display.

4) Select Save to record freeze frame. A confirming message “Save

success!” shows on the display and scan tool return to previous

menu.

5) If you don’t want to save the freeze frame data, press ESC

button to return to previous screen.

6.5. Retrieving I/M Readiness Status

I/M Readiness function is used to check the operations of the

Emission System on OBD2 compliant vehicles. It is an excellent

function to use prior to having a vehicle inspected for

compliance to a state emissions program.

CAUTION - By clearing trouble codes you also clear the readiness

status for the individual emission system readiness tests. In order

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 87 88

Pas de commentaire

Sealey EU908 Manuel d'utilisateur Page 46