Sealey VS8624 Manuel d'utilisateur télécharger pdf

 WARNING! Ensure that Health and Safety, local authority and general workshop practice regulations are

strictly adhered to.

 DO NOT use the unit if it, or any attachment, is damaged.

 Maintain tester in good and clean condition for best and safest performance.

 If required, ensure that the vehicle to be worked on is adequately supported with axle stands or ramps and is

chocked.

 Put transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission) and make sure

the parking brake is engaged, or wheel chocks are in place.

 Wear approved eye protection. A full range of personal safety equipment is available from your Sealey dealer.

 Wear suitable clothing to avoid snagging. Do not wear jewellery and tie back long hair.

 WARNING! Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark

plugs. These components create hazardous voltages when the engine is running.

 DO NOT connect or disconnect any test equipment with ignition on or engine running.

 Keepareextinguishernearby,whichissuitableforgasoline/chemical/electricalres.

 Account for all tools and parts being used and do not leave any in the engine bay.

 Keep reset tool dry, clean and free from oil, water and grease. Use a mild detergent on a clean cloth to clean

the outside of the tool.

 Operate the vehicle in a well-ventilated work area; exhaust gases are poisonous.

IMPORTANT: Always refer to the vehicle manufacturer’s service instructions to establish the current procedure

and data. These instructions are provided as a guide only.

 WARNING! The warnings and instructions discussed in this manual cannot cover all possible conditions

and situations that may occur. It must be understood that common sense and caution are factors which

cannot be built into this product, but must be applied by the operator.

 

Essential tool for extinguishing the service indicator and resetting Electronic

Parking Brake on Land Rover and Range Rover vehicles. Simple push button

operation allows EPB cable to be released and re-attached and, in the event

that the emergency hand brake has been activated, allows the user to reset

the system, and clears codes that may have been generated as a result of the

emergency cable being pulled. It also allows the EPB to be un-jammed when

the vehicle has entered a state of brake screech when applying the parking

brake, where the rear brakes squeak or rub when the vehicle is moving or

there is evidence of shoe-drag. Powered by connection to the vehicle.

INSTRUCTIONS FOR:

SERVICE INDICATOR & EPB RESET

TOOL - LAND ROVER / RANGE ROVER

MODEL No: VS8624

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly

maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.

USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE

AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

2. INTRODUCTION

Original Language Version

VS8624Issue:1-16/07/10

TECHNICAL HELP LINE No. 01284 757505

Please register your product with Sealey by completing the registration form on-line at www.sealey.co.uk

Navigate to Register Product. By registering your product you can take advantage of Sealey product and technical

updates via email.

1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - MODEL No: VS8624

 WARNING! Ensure that Health and Safety, local authority and general workshop practice regulations are strictly adhered to.  DO NOT use the

Page 2 - Original Language Version

Service LED. Function SelectionButton.EPB LED. OK Button. Mode SelectionButton. 3. FEATURES / OPERATION Original Language VersionVS8624Issue:1-

Page 3

Original Language VersionVS8624Issue:1-16/07/103.2. Service Reset - 24,000km / 15,000 miles / 12 months or 12,000km / 7,500

Page 4

4. APPLICATIONSOriginal Language VersionVS8624Issue:1-16/07/103.5. Cable Unjam3.5.1. Press Mode button to select correct type (EPB).3.5.2.

Page 5

Original Language VersionVS8624Issue:1-16/07/10

Page 6

Page 7

Page 8 - 01284 703534

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prio

Commentaires sur ces manuels

Pas de commentaire

Sealey VS8624 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Instruments de mesure Sealey VS8624. Sealey VS8624 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Sealey VS8624