Sealey VS8624 Manuel d'utilisateur télécharger pdf (Page 4)

4. APPLICATIONS

Original Language Version

VS8624Issue:1-16/07/10

3.5. Cable Unjam

3.5.1. Press Mode button to select correct type (EPB).

3.5.2. Press the Function button to select the appropriate EPB

operation.

3.5.3. Start the engine and run at idle.

3.5.4. Press the ‘OK’ button to activate the cable unjam

 function.WhentheFunctionLEDashes,turnthe

ignition off.

3.5.5. If the function is unsuccessful, Mode LED Selection will

 ash.

Note: As part of this process, the Clear codes routine is

automatically run to clear any codes within the EPB

system.

Note: For safety reasons we recommend removing the EPB

 30Afusefromthebatteryjunctionbox.

3.6. Clear Codes

3.6.1. Press Mode button to select correct type (EPB).

3.6.2. Press the Function button to select the appropriate EPB

operation.

3.6.3. Press the ‘OK’ button to clear any stored codes within

 theEPBmodule.TheFunctionLEDwillashtoindicate

clear codes was performed successfully.

3.6.4. If the function is unsuccessful, Mode LED Selection will

 ash.

Note: Any codes that are not able to be cleared will remain on

the Module. Use the Sealey VST Electronic Auto Service

and Diagnostic Tool to determine what these codes are

and what steps need to be taken to resolve the problem.

LandRover-EPB/SERVICERESET

Model: Fuel Type: Year of Manufacture:

DISCOVERYIII (IfFitted) Petrol/Diesel 2005-2009

RANGEROVERSPORT (IfFitted) Petrol/Diesel 2005-2009

Cable Unjam

Clear Codes

1 2 3 4 5 6 7 8

Pas de commentaire

Sealey VS8624 Manuel d'utilisateur Page 4