Sealey SA291 Manuel d'utilisateur télécharger pdf

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,

WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH

IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE

THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

 Follow all workshop safety rules, regulations and conditions when using wrench.

 WARNING!Disconnect from air supply before changing accessories or servicing.

 Maintain the wrench in good condition and replace any damaged or worn parts. Use

genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.

 WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.

 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each

use and ensure that all connections are secure.

 Only use impact sockets which are specifically designed for use with an impact wrench.

 Wear approved safety eye/face shield, ear defenders and hand protection.

 WARNING! Due to the possible presence of asbestos dust from brake linings, when working

around vehicle brake systems we recommend you wear suitable respiratory protection.

 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

 Keep children and non essential persons away from the working area.

 DO NOT use the wrench for a task it is not designed to perform.

 WARNING! DO NOT use wrench if damaged or thought to be faulty. (Contact Service Agent).

 DO NOT use wrench unless you have been instructed in its use by a qualified person.

 DO NOT carry the wrench by the air hose, or yank the hose from the air supply.

 DO NOT operate wrench if you are tired or under the influence of alcohol, drugs or intoxicating

medication.

 DO NOT carry wrench with your finger on the power trigger in order to avoid unintentional starting.

 DO NOT direct air from the air hose at yourself or others.

 When not in use disconnect from air supply and store in a safe, dry, childproof location.

 WARNING! The warnings, cautions and instructions discussed in this manual cannot

cover all possible conditions and situations that may occur. It must be understood that

common sense and caution are factors which cannot be built into this product, but must be

applied by the operator.

2. INTRODUCTION & SPECIFICATION

Drive size ..........................1”Sq

Working Max torque .......... 1200/1350lb.ft

Ultimate torque ...................1600lb.ft

Free Speed......................3500rpm

Weight .......................... 14.2kg

Air consumption ................... 21cfm

Operating pressure............90psi

Air inlet size ...............1/2”BSP

Noise Power ............ 98.76dB(A)

Noise Pressure.......... 87.76dB(A)

Vibration ................. 8.44m/s²

Uncertainty ................0.81m/s²

Suitable for heavy commercial tyre shop, fleet and workshop use. Features air/torque device, to

control power output, and reverse action. Long pattern anvil gets into deeply dished wheels.

Supplied with side handle.

Original Language Version

SA291.V3 Issue: 5(SP)- 12/11/13

INSTRUCTIONS FOR:

1” SQ DRIVE EXTRA HEAVY DUTY

IMPACT WRENCH, LONG ANVIL

MODEL No: SA291.V3

1 2 3 4

Résumé du contenu

Page 1 - SA291.V3

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly mai

Page 2 - Fig 1 Fig 2

 WARNING! Ensure you read, understand and apply safety instructions before use.4.1. Only use impact sockets which are specifically designed for use

Page 3 - 5. MAINTENANCE

WARNING! Disconnect wrench from air supply before changing accessories, servicing or performing maintenance. Replace or repair damaged parts. Use

Page 4

WARNING! – Risk of Hand Arm Vibration Injury.This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately.This tool is subject

Modèles reliés SA6005 | SA682 | GSA02 | SA681 | SA680 | GSA01 | SA56 | SA655 | SA29/S | SA297 | GSA6002 | SA4 | SA602L | SA6001 | SA686 | SA912 | SA51 | SA616 |

Commentaires sur ces manuels

Pas de commentaire

Sealey SA291 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Outils Sealey SA291. Sealey SA291 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés SA6005 | SA682 | GSA02 | SA681 | SA680 | GSA01 | SA56 | SA655 | SA29/S | SA297 | GSA6002 | SA4 | SA602L | SA6001 | SA686 | SA912 | SA51 | SA616 |

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Sealey SA291