Sealey VS8626 Manuel d'utilisateur télécharger pdf (Page 2)

Function

Button

Mode

Button

3. FEATURES / OPERATION

Original Language Version

VS8626Issue:2-29/12/11

The VS8626 tool:

 • IscompatiblewiththelatestCANvehicles.

 • EnablesFuelAdditivefunctionsforReplacingFilters,resetting

Additive Reset lights and performing the Regenerate Process.

ThenewVS8626Peugeot/CitroenParticulatetoolhasbeendesignedtoextinguish

theParticulateFilterLightafterthelterhasbeenreplaced,re-settheELOYS

additive light after it has been topped up, and also burn any particles that have

cloggedthelter(regenerate).

Filter Replace – This is a light on the dashboard that is illuminated when

 thelteriscloggedandneedschanging,orpotentially 

regenerating.

Additive Reset – This is a light on the dashboard that is illuminated when

 thefueladditiveisemptyorlowandneedsrelling.

Regenerate Filter – This will increase the engine speed to around 4000 RPM,

which in turn will increase the temperature of the exhaust

 gases;thiscausesthesootthathasbuiltuponthelterto

be burnt off.

System Selection for different Fuel Additive Systems.

Mode Selection for functions.

System selection full description.

3.1. Vehicle Set-Up

3.1.1. Ensurethatthevehicleisparkedoutside,onanon-ammablesurfaceandawayfromanycombustibles(the

exhaust system could reach temperatures above 300°C). That it’s engine is at working temperature, with at

least a ¼ tank of fuel and that there are no fault codes stored.

3.1.2. Ensurethatthevehicle’signitionisturnedoff.

3.1.3. Connectthetooltothecorrectdiagnosticsocketonthevehicle,refertothevehicleowner’smanual

for it’s location.

3.1.4. Turnonthevehicle’signition.

Function Buttons

1 2 3 4

Pas de commentaire

Sealey VS8626 Manuel d'utilisateur Page 2