Sealey SA602 Manuel d'utilisateur télécharger pdf

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,

WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH

IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE

THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

 WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations

are adhered to when using this equipment.

 WARNING!Disconnect from air supply before changing accessories or servicing.

 Maintain the wrench in good condition and replace any damaged or worn parts. Use

genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.

 WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.

 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each

use and ensure that all connections are secure.

 Only use impact sockets which are specifically designed for use with an impact wrench.

 Wear approved safety eye/face shield, ear defenders, and hand protection.

 WARNING! Due to the possible presence of asbestos dust from brake linings, when working

around vehicle brake systems we recommend you wear suitable respiratory protection

 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

 When not in use disconnect from air supply and store in a safe, dry, childproof location.

 Keep children and non essential persons away from the working area.

 DO NOT use the wrench for a task it is not designed to perform.

 WARNING! DO NOT use wrench if damaged or thought to be faulty. (Contact Service Agent).

 DO NOT use wrench unless you have been instructed in its use by a qualified person.

 DO NOT carry the wrench by the air hose, or yank the hose from the air supply.

 DO NOT operate wrench if you are tired or under the influence of alcohol, drugs or intoxicating

medication.

 DO NOT carry wrench with your hand on the power trigger, in order to avoid unintentional

starting.

 DO NOT direct air from the air hose at yourself or others.

 DO NOT use worn or damaged sockets.

INSTRUCTIONS FOR:

TWIN HAMMER 1/2”

AIR IMPACT WRENCH

MODEL No: SA602.V3

Original Language Version

SA602.V3 Issue: 3 - 14/12/11

2. INTRODUCTION & SPECIFICATION

Drive size ........................1/2’’Sq

Working/Max torque ............400/480lb.ft

Ultimate torque ...................500lb.ft

Free Speed.....................7500rpm

Air consumption ...................4.2cfm

Operating pressure..................90psi

Air inlet . . . ....... . . . . . . . . . . . . .1/4”BSP

Weight ....... . . . . . . . . . . . . . . . . . . 2.6kg

Vibration ....... . . . . . . . . . . . . . . .. 1.2m/s²

Sound power ....... . . . . . . . . . . . .93dB(A)

Sound pressure ................ 103dB(A)

Powerful 1/2" impact wrench with twin hammer mechanism and pressure feed lubrication system.

Air motor features quality bearings, ductile steel end plates and carefully finished components to

ensure smooth running and maximum power. Combination forward/reverse and speed selector.

Suitable for heavy tyre shop use.

1 2 3

Résumé du contenu

Page 1 - SA602.V3

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly mai

Page 2 - 4. OPERATING INSTRUCTIONS

3.1 Air Supply3.1.1 Recommended hook-up procedure is shown in fig. 1.3.1.2 Ensure wrench air valve, or trigger, is in the OFF position before conne

Page 3 - 5. MAINTENANCE

 WARNING!Disconnect the wrench from the air supply before changing accessories, servicing or performing maintenance. Replace or repair damaged p

Commentaires sur ces manuels

Pas de commentaire

Sealey SA602 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Outils Sealey SA602. Sealey SA602 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Sealey SA602