Sealey IR1000ST Manuel d'utilisateur télécharger pdf

INSTRUCTIONS FOR:

STAND FOR IR1000 INFRARED PANEL DRYER

MODEL No: IR1000ST

 WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this stand.

 Use the stand in a suitable work area.

 Keep the work area clean, uncluttered and ensure there is adequate lighting.

 DO NOT use the stand for any purpose other than that for which it is designed.

 DO NOT leave unattended when in use with the panel heater.

 DO NOT use stand on uneven ground.

 DO NOT use stand if any part is significantly damaged.

 Ensure the IR1000 lamp is securely fixed to the stand using the correct mounting bracket.

 Keep children and unauthorised persons away from the work area.

NOTE! For further safety instructions regarding the correct and safe use of the panel dryer please see the instructions supplied with

the IR1000 Infrared Short wave Panel Dryer.

Carefully unpack the product and check the contents against the diagram (fig.1) and parts list below. Should any

items be missing or damaged contact your Sealey dealer.

A sturdy 6ft (1800mm) chrome plated stand. Combines all the features of a flexible hand held heater, with all the benefits of a free standing

paint dryer. Full height ‘slide and lock’ heater bracket. Ideal for use on small repairs and drying jobs, for example engine drying - stripe

removal - filler drying - stone chip repairs and preheating prior to spraying. Easy assembly and designed to suit the IR1000 Hand Held

Infrared Panel Dryer.

Note: All number references are to fig.1 on the right.

4.1. With the H base (5) on its side, insert the M12 bolt (6) and washer (7) through the centre hole.

4.2. Fix pole (4) to H base bolt (6) by locating the captive nut in one end of the pole and secure tightly.

4.3. Turn the stand so that it is upright.

4.4. Attach the next upright section (3) followed by the top section (1).

4.5. Attach the slide and lock assembly (2) by sliding over the pole assembly and secure at any desired

position using the hand wheel.

4.6. The stand is now ready to be used in conjunction with the IR1000 Hand-Held Infrared Dryer.

ITEM PART No: DESCRIPTION

1 IR1000ST.SPT UPPER POLE

2 IR1000ST.ST1 SLIDE & LOCK BRACKET

3 IR1000ST.SP1 MAIN POLE (UPPER)

4 IR1000ST.SP2 MAIN POLE (LOWER)

5 IR1000ST.SB BASE

6 ES550-15 BOLT (M12X60)

7 MC390/16 WASHER (M12)

fig.1

2. INTRODUCTION

3. CONTENTS

4. ASSEMBLY

5. PARTS

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE

PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

1. SAFETY

Original Language Version

IR1000ST Issue: 2(L) - 09/06/14

1 2

Résumé du contenu

Page 1 - IR1000ST

INSTRUCTIONS FOR: STAND FOR IR1000 INFRARED PANEL DRYER MODEL No: IR1000ST WARNING! Ensure Health & Safety, local authority, and general worksho

Page 2 - 01284 703534

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prio

Commentaires sur ces manuels

Pas de commentaire

Sealey IR1000ST Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Outils Sealey IR1000ST. Sealey IR1000ST User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Sealey IR1000ST