Sealey STS01 Manuel d'utilisateur télécharger pdf

 Ensure the folding step is in good order and condition.

 DO NOT use if damaged.

 Apply vehicle handbrake and chock wheels before

attaching or using the wheel step (put automatics in

‘Park’).

 Ensure that the vehicle is stable before using the

wheel step.

 Ensure that the wheel step is mounted level on the

wheel/tyre.

 DO NOT heavily load the vehicle causing the

suspension to depress whilst the wheel step is in place.

 WARNING: The warnings, cautions and

instructions discussed in this manual cannot cover

all possible conditions and situations that may

occur. It must be understood that common sense

and caution are factors which cannot be built into

this product, but must be applied by the operator.

INSTRUCTIONS FOR:

FOLDING WHEEL STEP

MODEL No: STS01

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly

maintained, give you years of trouble free performance.

changed either before or after hanging the frame onto a

vehicle wheel/tyre.

4.4. Hang frame on tyre: Ensure that the handbrake is on and

the wheels are chocked before positioning the wheel step.

4.4.1. Check that there is sufficient clearance between the wheel

arch and the tyre and then insert bar (C) into the space

above the tyre and drop it down over the top of the tyre

ensuring that it is securely hooked over the back. If not,

adjust the position of bar (C). Ensure that the step is level

and the vertical parts of the frame are resting securely onto

the face of the wheel/tyre.

4.4.2. Adjust the height of the step if necessary.

4.4.3 When using the step be aware of your surroundings. Do not

become so engrossed in what you are doing that you forget

you are standing on a step.

4.5. Removing the step: Remove the step immediately after use

and certainly before the vehicle is next used.

Heavy duty wheel step gives safe & easy access to

engine or top of vehicle, ideal for 4x4's. Heavy gauge all

steel construction folds for easy storage. Wheel capacity

Ø14" to 20" and will fit tyres up to 10" deep. Rubber

topped platform for added grip and safety. Platform is

height adjustable (3 mounting points 90mm apart).

Weight capacity: 225kg.

3. SPECIFICATION

2. INTRODUCTION

4. OPERATION

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND

CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY

CAUSE DAMAGE AND/OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. RETAIN INSTRUCTIONS FOR FUTURE USE.

Weight Capacity: 225kg. Step width : 560mm. Step depth : 210mm.

01284 757500

01284 703534

sales@sealey.co.uk

www.sealey.co.uk

Web

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

 WARNING: To prevent personal accident and/or damage

to the vehicle, it is imperative that the vehicle does not

move during the fitting or use of the wheel step. Chock

the wheels and ensure that the vehicle handbrake is on.

(Put automatics in 'park)

4.1. Unfold the step frame: Take the step in its flat condition

as shown in fig.1 and pull the adjustable wheel bar (C) up

towards you until it reaches its stops

4.1.1 Using bar (C), lift the whole frame away from the step into

the fully open configuration shown in fig.2.

4.2. Adjust bar (C) to suit tyre depth (A): Bar (C) can be set to

one of three positions as indicated at 4, 5 & 6 in fig.2. These

holes occur on both sides of the frame. To move the bar to

the next set of holes, depress the sprung chrome buttons (7)

on either side into the frame and slide the frame in or out

until the buttons 'pop out' into the next set of holes.

4.3. Adjust height of step (B): There are three positions for the

step as indicated at 1, 2, & 3 in fig.2. Loosen and remove nut

(8) on both sides of the step. Withdraw the two bolts and

reassemble the step at the height required ensuring that the

nuts are not so tight as to prevent the hinges operating when

it is required to fold the frame flat. The step height can be

Sole UK Distributor, Sealey Group,

Kempson Way, Suffolk Business Park,

Bury St. Edmunds, Suffolk,

IP32 7AR

Original Language Version

STS01 Issue No.1 09/07/12

fig.1

fig.2

1. SAFETY INSTRUCTIONS

FOLDING WHEEL STEP 1

Résumé du contenu

Page 1 - FOLDING WHEEL STEP

 Ensure the folding step is in good order and condition.  DO NOT use if damaged. Apply vehicle handbrake and chock wheels before attaching or

Commentaires sur ces manuels

Pas de commentaire

Sealey STS01 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la maison Sealey STS01. Sealey STS01 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la maison Sealey STS01