Sealey SAC2420E110V Manuel d'utilisateur télécharger pdf

INSTRUCTIONS FOR:

COMPRESSOR 24LTR DIRECT DRIVE 2HP

110V

MODEL No: SAC2420E110V.V2

1.2. GENERAL SAFETY

3 Familiarise yourself with the application and limitations of the

compressor.

3 Ensure the compressor is in good order and condition before

use. If in any doubt do not use the unit and contact an

electrician/service agent.

 WARNING! Compressor must only be serviced by an

authorised agent. DO NOT tamper with, or attempt to

adjust, pressure switch or safety valve.

3 Before moving, or maintaining the compressor ensure it is

unplugged from the mains supply and that the air tank

pressure has been vented.

3 Maintain the compressor in good condition and replace any

damaged or worn parts. Use genuine parts only. Unauthorised

parts may be dangerous and will invalidate your warranty.

3 Read the instructions relating to any accessory to be used

with this compressor. Ensure the safe working pressure of any

air appliance used exceeds compressors output pressure. If

using a spray gun, check that the area selected for spraying is

provided with an air change/ventilation system.

3 Ensure the air supply valve is turned off before disconnecting

the air supply hose.

1.1. ELECTRICAL SAFETY

 WARNING! It is the responsibility of the owner and the operator

to read, understand and comply with the following: You must check

all electrical products before use to ensure that they are safe. You

must inspect power cables, plugs, sockets and any other connectors

for wear or damage. You must ensure that the risk of electric shock

is minimised by the installation of appropriate safety devices. A

Residual Current Circuit Breaker (RCCB) should be incorporated in

the main distribution board. We also recommend that a Residual

Current Device (RCD) is used. It is particularly important to use an

RCD with portable products that are plugged into a supply which is

not protected by an RCCB. If in any doubt consult a qualified

electrician. You may obtain a Residual Current Device by contacting

your Sealey dealer. You must also read and understand the

following instructions concerning electrical safety:

1.1.1. The Electricity at Work Act 1989 requires that all portable

electrical appliances, if used on business premises, are

tested by a qualified electrician, using a Portable Appliance

Tester (PAT), at least once a year.

1.1.2. The Health & Safety at Work Act 1974 makes owners of

electrical appliances responsible for the safe condition of

those appliances and the safety of the appliance operators.

If in any doubt about electrical safety, contact a qualified

electrician.

1.1.3. Ensure that the insulation on all cables and on the appliance

is safe before connecting it to the power supply. See 1.1.1.

and 1.1.2. and use a Portable Appliance Tester.

1.1.4. Ensure that cables are always protected against short circuit

and overload.

1.1.5. Regularly inspect power supply cables and plugs for wear or

damage and check all connections to ensure that none are

loose.

1.1.6. Important: Ensure that the voltage marked on the appliance

matches the power supply to be used and that the plug is

fitted with the correct fuse.

1.1.7. DO NOT pull or carry the appliance by the power cable.

1.1.8. DO NOT pull the plug from the socket by the cable.

1.1.9. DO NOT use worn or damaged cables, plugs or connectors.

Immediately have any faulty item repaired or replaced by a

qualified electrician. When a BS EN 60309 plug is damaged,

cut the cable just above the plug and dispose of the plug

safely.

Fit a new plug according to the following instructions:

a) Connect the GREEN/YELLOW earth wire to the

earth terminal.

b) Connect the BROWN live wire to the live terminal ‘L’.

c) Connect the BLUE

neutral wire to the

neutral terminal ‘N’.

d) After wiring, check

that there are no bare

wires, that all wires

have been connected

correctly, that the cable

outer insulation extends

beyond the cable

restraint and that the

restraint is tight.

NOTE: If using a transformer

to supply the

compressor, it must be

rated at a minimum of

2kVA to allow the

compressor to run

efficiently.

Original Language Version

SAC2420E110V.V2 Issue No:3(I)-24/11/14

g

Guide to symbols

Warning: Electricity

Warning: Hot

Surface

Warning: Automatic

start up

Wear ear protection

Read the instruction

manual before use

DO NOT open the air

cock before an air hose

is attached

DO NOT operate the

compressor with

enclosure displaced

Ensure oil level

 correctbeforerstuse

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT

CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL

INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

1. SAFETY

1 2 3 4

Résumé du contenu

Page 1 - SAC2420E110V.V2

INSTRUCTIONS FOR:COMPRESSOR 24LTR DIRECT DRIVE 2HP110VMODEL No: SAC2420E110V.V21.2. GENERAL SAFETY 3 Familiarise yourself with the application a

Page 2 - 5. OPERATION

4. TOOL SELECTION IMPORTANT: Take care when selecting tools for use with the compressor. Air tool manufacturers normally express the volume

Page 3 - 6. MAINTENANCE

6. MAINTENANCE 6.3. OPERATIONS TO BE CARRIED OUT EVERY 100 HOURS: (or more frequently, if the compressor operates in a very dusty atmosphere):

Page 4 - 7. TROUBLESHOOTING

fig.6 fig.7 7. TROUBLESHOOTING FAULT CAUSE REMEDY1A) Pressure drop in the tank. Air leaks at connections. Run compressor to max. pressure, s

Modèles reliés SAC5020E110V | SAC5020E | SSQC0903P | SSQC2405P | SSQC2409 | SAC2420E |

Commentaires sur ces manuels

Pas de commentaire

Sealey SAC2420E110V Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Sealey SAC2420E110V. Sealey SAC2420E110V User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés SAC5020E110V | SAC5020E | SSQC0903P | SSQC2405P | SSQC2409 | SAC2420E |

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Sealey SAC2420E110V