Sealey AP1200M Manuel d'utilisateur télécharger pdf

REF. DESCRIPTION QUANTITY

1 Workbench Top 1

2 Long Support Bar 2

3 Workbench Legs 4

4 Short Support Bar 2

5 Oil Drainage Bowl 1

6 Drawer 1

7 Swivel Wheel 1

8 Locking Swivel Wheel 1

9 Male and Female

Ball Bearing Sliders 2

10 Large Bolts 24

11 Small Bolts 8

12 Washers 32

13 Screws 6

14 Nuts 16

AP1200M - 1 - 110507

INSTRUCTIONS FOR:

MOBILE WORKBENCH WITH OIL DRAIN

Model: AP1200M

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and

properly maintained, give you years of trouble free performance.

1. SAFETY INSTRUCTIONS

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.

USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE

DAMAGE OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

2. CONTENTS

1.1 GENERAL SAFETY

! Dispose of waste fluids in accordance with local authority regulations.

" WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations

are adhered to when using this bench.

! Locate bench in a suitable working area.

! Keep the work area clean, uncluttered and ensure there is adequate lighting.

" WARNING! Use bench on level and solid ground, preferably concrete. Avoid tarmacadam

since the bench may sink into the surface.

! Keep the bench clean and tidy in accordance with good workshop practice.

! Keep children and unauthorised persons away from the working area.

" WARNING! This bench is not electrically insulated and is therefore not suitable for electrical

repairs of any sort.

# DO NOT use the bench for any purpose other than that for which it is designed.

# DO NOT do work on the bench without the workpiece being adequately secured. Use clamps

or a vice (not included) to secure the workpiece. Available from your Sealey dealer.

# DO NOT use the bench out of doors.

# DO NOT get the bench wet or use in damp or wet locations or areas where there is condensation.

# DO NOT clean the bench with any solvents which may damage the paint surface.

" WARNING! This is a heavy product, assistance will be needed during assembly.

2.1 Remove all parts and fixings from the box. Ensure that you have adequate help to remove the bench top from the box (It is too heavy

for one person to lift safely).

2.2 Check the contents against the parts listed below. Should there be any damaged or missing parts contact your supplier immediately.

1 2

Résumé du contenu

Page 1 - Model: AP1200M

REF. DESCRIPTION QUANTITY1 Workbench Top 12 Long Support Bar 23 Workbench Legs 44 Short Support Bar 25 Oil Drainage Bowl 16 Drawer 17 Swivel Wheel 18

Page 2 - 01284 703534

Screw into placefig. 53. ASSEMBLY" WARNING! This is a heavy product - you will need assistance when assembling.3.1 Turn the top of the workbench

Commentaires sur ces manuels

Pas de commentaire

Sealey AP1200M Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Sealey AP1200M. Sealey AP1200M User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Sealey AP1200M